Front Panel Facilities - Pioneer VSX-D704S Operating Instructions Manual

FRONT PANEL FACILITIES
Illustration shows multi-voltage model.
®® ®
® ®
®®@@ @
Remote sensor
POWER STANDBY/ON switch,
STANDBY indicator
(Multi-voltage model only)
This is the switch for electric power.
ON : When set to the ON position, power is supplied
and the unit becomes operational.
STANDBY: When set to the STANDBY position, the main
power flow is cut and the unit is no longer fully
operational. A minute flow of power feeds the
unit to maintain operation readiness.
(Multi-voltage model only)
The STANDBY indicator lights when the power is set to
STANDBY, and goes out when set to ON.
(Timer ON/OFF possible)
When the unit is switched ON, ON/OFF control can be
performed by means of the optional timer.
NOTE:
When the power is initially turned ON, muting will be apphed to
prevent sound from being output for about 5 seconds.
® RETURN button
Press this button to return the receiver to its initial state.
TUNER is selected at this initial state. Adjust the sound level
by using the MASTER VOLUME control.
TAPE 2 MONITOR .... OFF MUTING ................... OFF
SFC MODE .............. OFF FUNCTION .......... TUNER
SUPER BASS ............ OFF
And SPEAKERS buttons switch as follows,
Before pressing the After pressing
RETURN button
Both A and B are off -_ OnlyAison
Only A is on --_- No change
OnlyBison --_ Both A and B are on
Both A and B are on _ No change
NOTE:
Press the RETURN button, and the frequency last selected is
received. If reception of the frequency last selected is not possible,
the mode automatically switches to AUTO TUNING.
RESET button
Use this when normal operation is not possible because of
external influences such as static electricity or lightning, or
when operations are not functioning even when operation
buttons are pressed. Press this button to return to normal
operating conditions.
(The input selector automatically switches to TUNER, and
SPEAKERS button A is the only one ON.
Also, the tuner station memory, surround settings, and remote
control REMOTE SET UP settings are all returned to their
initial defaults.)
If you press this button when the power is ON, the unit switches
to POWER STANDBY.
® SPEAKERS buttons (A,B)
ON/OFF switches for the A and B speaker systems.
(_ Input selector buttons
VCR 1 Press when performing playback on a first VCR unit.
VCR 2 Press when performing playback on a second VCR
unit.
VIDEO Press when performing playback on a TV camera or
VCR connected to VIDEO INPUT jack on the front
panel.
TV/SAT : Press to watch TV broadcasts from the TV tuner
connected to the rear panel TV/SAT IN jacks.
LD : Press when performing playback on an LD player.
TAPE 1 : Press when performing playback on an a
cassette deck.
TAPE 2 MONITOR
: Press when performing playback on a second
cassette deck and when monitoring recording.
PHONO : Press when playing records on a turntable.
TUNER : Press when listening to radio broadcasts.
CD : Press when playing compact discs on a CD player.
15
<ARB7035>