Table of Contents
Advertisement
REMOTE CONTROL OPERATION
IS
C
Intelligent
System Control
TAPE operation
J
_o) POWER button:
Switches cassette deck power ON/OFF.
6) _
(FF) button:
Rapidly advances the tape in the direction of the arrows.
(3) • (STOP) button:
Stops the tape transport.
(4)
II
(PAUSE/STILL)
button:
Temporarily stops tape transport. Press again to resume
tape transport.
Ls) IH_ (FF) button:
Rapidly advances the tape in the direction of the arrows.
@ I_ (PLAY)button:
Selects playback.
[ Tuner
operation
_) ST -- (Station Down) button:
Used for recalling memorized stations.
(_ FQ -- (Frequency Down) button:
Shifts the frequency down.
(_) FQ 4"- (Frequency Up) button:
Shifts the frequency up.
(_) ST 4- (Station Up) button:
Used for recalling memorized stations.
(_) Band button:
Switches the FM and AM bands in turn.
]
Auto tuning:
Press FQ 4- (up) or -- (down) button until the frequency starts
to change, then release it. The tuner will automatically search
for a broadcasting station and stops when one is found, and
the TUNED indicator lights up. To search for another station,
press again.
Manual tuning:
Press FQ 4- (up) or -- (down) button and release quickly. The
tuning frequency will change by one step each time the button
is pressed. Press as many times as necessary to tune in the
desired station. The TUNED indicator lights up when the station
is tuned in best.
• If you keep the FQ (up/down) button depressed after the
frequency
has began to change, the reception frequency
changes continuously, and stops when the button is released.
NOTE:
When AUTO TUNINGis in use, reception may not be possible over
long distances or when signals are weak. At these times MANUAL
TUNINGis recommended.
27
<ARB7035>
Hide quick links:
Advertisement
Table of Contents
