Painted Surfaces - GE JGS968 Owner's Manual

GEPpp/iances.com
Stainless Steel Surfaces (on some models)
Do notuse a steel wool pad;it will scratch
the surface.
To clean die stainless steel surfime,
use warm sudsy water or a stainless steel
cleaner or polish. Ah,vays wipe the surfime
in the direction of the grain. Follow the
cleaner insuucfions for cleaning the
stainless smel surflme.
To inquire about purchasing stainless
smel appliance cleaner or polish, or to
find the location of a dealer or Mabe
Parts Store nearest you, please ca/1 our
toll-flee number:
NationalPartsCenter 1.800.626.2002 (U.S.)
1.800.661.1616 (Canada)
GEApp/iances.com
Painted Surfaces
Painted surfitces include file top and
sides of file dooh and file drawer flont.
Clean these with soap and wamr or
a vinegar and wamr solution.
Do not use commercial oven cleaners,
cleaning powders, steel wool or harsh
abrasives on any painted surflme.
I
Centervent
Oven Vent
The oven is vented through an opening
in the cooktop under the g_ille.
Never cover the opening with aluminum
foil or any other material. Tiffs would
prevent the oven vent flom working
properly:
Control Panel
If desired, t hetouch padsmaybe turnedoff
beforecleaning.
See the
Control
Lockout section.
Clean up splatters widl a damp cloflL
You may a/so use a glass cleaner
Remove heavier soil with warm soapy
wamr Do not use abrasives of any kind.
Turn on thetouch padsaftercleaning.
Ovenfloor
Removable Oven Floor
Toremovethe ovenfloor for easier cleaning:
-71 Remove the oven door using the
instructions in the Lift-Off OvenDoor
section.
[_ Grasp oven floor at the rear finger
slots on each side, lift it up, push it
back and pull it out.
_]_ Clean the oven floor with warm
soapy water
iMPORTANT: Ah,vays replace the
removable floor before the next use.
35