Careandcleaning Oftherange; Burner Assembly - GE JGS968 Owner's Manual

Careandcleaning oftherange. C Appliances.com
Be sure aft controls are off and all surfaces are cool before cleaning any part of the range,
" A WARNING:If our
range is removed for cleaning, servicing or any
reason, be sure the anti-tip device is reengaged properly when the range is replaced,
Failure to take this precaution could result& tipping of the range and cause injury,
How to Remove Protective Shipping Film and Packaging Tape
Careflflly grasp a corner of die protective
shipping film with yore fingers and slowly
peel it flom the appliance suxface. Do
not use any sharp imms to xem(we the
film. Remove Ml of the film before using
the appliance for the first time.
To assure no damage is done to die
finish of die product, rite safest way to
remove the adhesive flom packaging tape
on new appliances is an application of a
household liquid dishwashing demrgent.
Apply with a soft cloth and Nlow to soak.
NOTE:Theadhesive mustberemoved fromall
parts.It cannotberemoved if it is baked on.
Control Knobs
Thecontrol k nobsmaybe removed foreasier
cleaning.
Make sure die kabobs are in die OFF
positions and pull fllem smdght off the
smms fbr cleaning.
The knobs can be cleaned in a
dishwasher or dley may a/so be washed
with soap and
wateI:
Make sore the insides
of the knobs are dxT before replacing.
Replace die lu_obs in die OFF posidon
[o ensure proper placement.
r
Burnercae
Burnerhead
Electroue _ .
Burnerbase
A CAUTION:
DONOTOPERATE T HE BURNER
WITHOUT A LLBURNER PARTS
IN PLA CE
Burner Assembly
The burner assemblies should be washed
regularly and, of course, after spillovex_.
Turn all controlsoff beforeremoving burner parts.
The burner grates, burner heads and
burner caps can be removed for easy
cleaning.
The elecuode of die spark igniter is
exposed beyond die surface of die
burner base. When cleaning tlle cooktop,
be carefifl not to snag file electrode of
the spark igniter with yore cleaning
cloth. Damage to the igmimr could occur
Toavoid snagging a cloth on the span
igniter, leave the burner heads in place
when cleaning/the cooktop.
Be careflfl not to push in any cooktop
conuols while cleaning the cool<top.
A slight electrical shock might result
which could cause you to knock over
]lot cookware.
Wash burner parts widl an a/l-purpose
xloxl-abrasive cleaner and _,vilxi?Q _ ,va[eI:
Soak stubborn soil Dxy them with a
cloth---<to not reassemble while wet.
To xe;ksseInble, replace the burner head
first, then the burner cap and finally
the burner grate. Be sure the pins in
the burner head are properly locamd
in the burner base holes.
31