J2S968TEK/KEK/BEK
GE Profile
30" Slide-In Dual Fuel Range
™
You must use the rear filler strip kit shipped with
the range or the optional accessory backguard
when installing these ranges
Note: Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least
194° temperature rating.
Optional Kits for Slide-In Gas Ranges:
(Available at additional cost)
Lower/Side Trim Kits
JXS56BB - Lower Trim Kit (Black)
JXS56WW - Lower Trim Kit (White)
JXS56CC - Lower Trim Kit (Bisque)
JXS77BB - Side Trim Kit (Black)
JXS77WW - Side Trim Kit (White)
JXS77CC - Side Trim Kit (Bisque)
Accessory Backguards
JXS32BB (Black) - 4" High
JXS32SS (Stainless) - 4" High
JXS32CC (Bisque) - 4" High
JXS32WW (White) - 4" High
JXS37BB (Black) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37WW (White) - 5-1/4" High
Endcap Kit: JXS40 - Endcap kit to accommodate replace-
ment where countertop may already be notched.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
For answers to your Monogram,
GE Profile
®
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
800.626.2000.
or
™
service,
Specification Created 7/05
221202