Screensaver - Panasonic TH-152UX1 Operating Instructions Manual

• 24p SMOOTH FILM
During 2D or 3D viewing, images captured at 24
frames per second are provided in a smooth manner.
Off On
Note:
This function can be set only for 24p signal input with 2D
or 3D images
• HDMI Range
Switches the dynamic range according to the input signal from HDMI 1 and HDMI 2 terminals.
Video(16-235) Full(0-255)
Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player
Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer
Auto: Switches the dynamic range automatically between "Video(16-235)" and "Full(0-255)" according to the input signal.
Note:
This function can be set only for HDMI 1 and HDMI 2 terminal input.
• SDI Signal Format
Enabled only when the signal is input to the 4K SDI IN terminal.
Selects the format of the input signal for the 4K SDI IN terminal.
For 3,840/30p or 3,840/24p signal input:
Auto YCbCr(4:4:4) 10bit
RGB(4:4:4) 12bit
For 4,096/24p signal input:
Auto RGB(4:4:4) 12bit
Auto: Automatically selects the signal format according to the input signal.

Screensaver

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
Setup
3D Settings
Signal
Screensaver
Extended life settings
Input label
Power save Off
PC Power management
Off
Auto power off
Off
English ( UK )
OSD Language
1 Function selection
Screensaver
Start
Negative image
Function
2
Start setting
Select "Start".
Screensaver
Start
Negative image
Function
• 3D 24p Film Display
Auto
RGB(4:4:4) 10bit
XYZ(4:4:4) 12bit
access
2
select
1
change
2
select
1
Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't be displayed.
Overlay scrolling bar : The brightness of the image will be decreased and a white bar will scroll on it.
White screen : The whole screen will be white.
Note:
When the input signal is a 4k2k signal, only "Scrolling bar only" and "White screen" can be selected.
set
2
select
1
For 3D images, images captured at 24 frames per second are set.
60Hz 48Hz
60Hz: Increases the number of frames to reproduce
more natural movement images.
48Hz: Reproduces images like ¿ lm-speci¿ c.
Note:
This function can be set only for 24p signal input with 3D images.
YCbCr(4:2:2) 12bit
Screensaver
Start
Negative image
Function
Negative image
White screen
The menu screen will disappear and the
SCREENSAVER will be activated. To stop the
Screensaver under On, press any button.
Note: When the display is turned off, the
Scrensaver will be deactivated.
Setup menu
YCbCr(4:4:4) 12bit
Scrolling bar only
Overlay scrolling bar
37