Accessories; Accessories Supply; Remote Control Batteries - Panasonic TH-152UX1 Operating Instructions Manual

Accessories

Accessories Supply

Check that you have the accessories and items shown
Operating Instruction book
Fixing band × 3
TMME203

Remote Control Batteries

Requires two R6 (AA) batteries.
1. Pull and hold the hook, then open the battery cover.
Hook
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline
batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: "Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.
6. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, ¿ re or the like.
6
Remote Control Transmitter
N2QAYB000560
These accessories will be used by professional installers when they install the unit.
Nut cover × 3
(M20)
Power cable ¿ xing
plate A × 2
Open
Batteries for the Remote
Control Transmitter
(R6 (AA) Size × 2)
Nut cover × 3
(M16)
Power cable ¿ xing
plate B × 2
2. Insert batteries - note correct polarity ( + and -).
"R6 (AA)" size
Bolt × 3
Allen wrench
Close