Selecting The Input Signal - Panasonic TH-152UX1 Operating Instructions Manual

Selecting the input signal

INPUT
HDMI1
HDMI2
SLOT INPUT
4K-SDI
4K-DVI
PC
Using dedicated buttons for input selection
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Image retention (image lag) may occur on the plasma display panel
when a still picture is kept on the panel for an extended period. The
function that darkens the screen slightly is activated to prevent image
retention (see page 45), but this function is not the perfect solution to
image retention.
Press to select the input signal to be played back from the equipment
which has been connected to the Plasma Display.
HDMI input terminal in HDMI 1.
HDMI input terminal in HDMI 2.
Input terminal in Terminal Board.*
4k2k HD-SDI input terminal in SDI IN.
4k2k DVI-D input terminal in DVI-D IN.
PC input terminal in PC IN.
* "SLOT INPUT" appears when the Terminal Board is connected.
Press to select HDMI signal terminals in HDMI 1 or HDMI 2.
Press to select 4k2k signal in SDI IN or DVI-D IN.
Press to select PC signal terminal in PC IN.
Press to select Input terminal in Terminal Board.
ENTER/
MENU
INPUT
15