Connections; Video Equipment Connection - Panasonic TH-152UX1 Operating Instructions Manual

Connections

Video equipment connection

Cable ¿ xing
Secure any excess cables with band as required.
Note:
Three ¿ xing bands are supplied with this unit. In case of securing cables at six positions, please purchase it separately.
Pass the attached cable
¿ xing band through the clip
as shown in the ¿ gure.
1
SERIAL
Control the Plasma
Display by connecting
to PC. (see page 12)
PC IN AV IN (HDMI 1/2)
PC Input
HDMI Input Terminal
Terminal
(see page 10)
(see page 11)
To secure cables connected to Terminals, wrap the cable ¿ xing band around them
then pass the pointed end through the locking block, as shown in the ¿ gure.
While ensuring there is suf¿ cient slack in cables to minimize stress, ¿ rmly
bind all cables with the supplied ¿ xing band.
2
3D SHUTTER OUT
Connect the 3D IR
TRANSMITTER
(optional accessory).
SLOT (DVI-D IN)
DVI-D Input Terminal (equivalent of DVI-D Terminal
Board (TY-FB11DD)) (see page 10)
It accepts the Terminal board (optional accessories).
(see page 1)
To tighten:
Pull
SDI IN 1-4 (4 systems)
4k2k signal Dual Link
HD-SDI input terminal
(see page 8)
To loosen:
Push the catch
Pull
DVI-D IN 1-4 (4 systems)
4k2k signal Single Link
DVI-D input terminal
(see page 9)
7