Panasonic TH-152UX1 Operating Instructions Manual page 49

Item
Off
Off: All the buttons at the right side of the main unit can be used.
MENU&ENTER:
On: Locks all the button on right side of main unit.
Button lock
Sets Button lock with the unit buttons in the following procedure.
Off: Press
MENU&ENTER: Press
On: Press
Off
Off: You can use all of the buttons on the remote control.
Remocon User level User1: You can only use
User2: You can only use
User3: Locks all the buttons on remote control.
Enable: Enables the "Off-timer function".
Disable: Disables the "Off-timer function".
Off-timer function
Note: When "Disable" is set, the Off-timer is cancelled.
Select the aspect switching pattern on pressing
Mode1: Aspect mode suitable for regions such as Europe and China (PAL/SECAM system)
Aspect Mode
Mode2: Aspect mode suitable for regions such as North America and Japan (NTSC system)
All Aspect: Aspect mode for all aspect options
Sets the operational mode of the automatic position adjustment in the Pos./Size menu.
Manual: Automatic position adjustment starts when
Auto Setup
Auto:
For switching functions in setting menus used for television studio applications.
White balance
Studio mode
Studio Gain
Under scan
Function button
Set the function to operate when the FUNCTION button 1 to 4 on the remote control is pressed.
assign 1
3D settings: The "3D Settings" menu is displayed.
Function button
Scrolling bar: The screen saver activates, and after 15 minutes, the display power shuts down
assign 2
(standby).
Function button
Test patterns: The test pattern is displayed by switching among seven patterns.
assign 3
Blue only: The screen displays only blue color for image adjustment.
Function button
Signal: The "Signal" menu is displayed.
assign 4
When the input signal is a 4k2k signal, adjust the horizontal position.
H-Position
When the input signal is a 4k2k signal, adjust the vertical position.
V-Position
MENU&ENTER
Locks and buttons on right side of main unit.
MENU MENU ENTER/ ENTER/
four times Press
four times Press
ENTER/ ENTER/
four times Press
User1 User2
, ,
button on the remote control.
position adjustment is executed from the Pos./Size menu.
Other than remote control or menu operation, automatic position adjustment starts:
When the display power is turned ON.
When the input signal is switched.
Studio mode: On
"Studio" can be selected.
Can be switched On and Off.
Can be switched On and Off.
Adjustments
On
four times Press
INPUT
four times Press
four times Press
ENTER/ ENTER/
User3
, , , , buttons on the remote control.
from the 3 modes.
is pressed on the remote control or automatic
(set to "Off" and cannot be changed).
(set to "Off" and cannot be changed).
Options Adjustments
four times Press
four times Press
INPUT
four times Press
Studio mode: Off
"Studio" not available.
Cannot be speci¿ ed
Cannot be speci¿ ed
The four split screens respectively
move in the horizontal direction.
The four split screens respectively
move in the vertical direction.
ENTER/ ENTER/
ENTER/ ENTER/
ENTER/ ENTER/
43