3D Safety Precautions; Precautions); Using Function Button - Panasonic TH-152UX1 Operating Instructions Manual

Options Adjustments
Item

3D Safety Precautions

Normalization
When both main unit buttons and remote control are disabled due to the "Button lock" or "Remocon User level"
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
The "Shipping" menu is displayed and the lock is released when it disappears.

Using FUNCTION button

Pressing the FUNCTION button activates one of the following ¿ ve functions. The settings of
functions are performed with the "Function button assign 1" to "Function button assign 4" on
the Options menu. (see page 43)
3D Settings / Signal
Scrolling bar / Test patterns / Blue only
Scrolling bar
Activates the "Scrolling bar only" screensaver. After
15 minutes, the display enters standby mode.
To exit this mode, press any button.
Blue only
The screen displays only blue color for image
adjustment.
To exit this mode, press FUNCTION button.
Note:
"PC Power management" and "Auto power off" are deactivated during "Scrolling bar" or "Test patterns" operation.
(see page 34)
44
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from "On" to "Off", the con¿ rmation screen is displayed as below.
Pressing "YES" switches the setting.
The menu screen is displayed.
(Example: 3D Settings)
3D Settings
3D Picture Display
3D Picture Format
3D Picture Sequence
Safety Precautions
Pressing the FUNCTION button clears the menu.
Con¿ rmation screen (Example: Scrolling bar)
Function 1
Scrolling bar
Yes
Adjustments
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
YES
button on the remote control and hold for more than 5 seconds.
3D
Auto
Off
No
Test patterns
Each time you press
displayed (seven in all).
Color Bars
Black
To exit this mode, press any button other than
NO
Press to
select
"Yes".
Press.
, a different test pattern is
Red Green
Frame
1% window (2 lines × 2 dots)
The operation
starts.
Blue
.