Signal Menu - Panasonic TH-152UX1 Operating Instructions Manual

Setup menu

SIGNAL menu

Note:
"Signal" setup menu displays a different setting condition for each input signal.
Setup
3D Settings
Signal
Screensaver
Extended life settings
Input label
Power save Off
PC Power management Off
Auto power off Off
English ( UK )
OSD Language
Input signal display
Displays the frequency and the type of the current
input signal.
This display is valid only for RGB / PC and Digital
input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital
signal input.
• XGA Mode
This menu is displayed when the input signal is analog (PC). This unit supports three types of XGA signals with 60Hz vertical
frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Auto 1024×768
Auto: Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.
Note:
After making this setting, be sure to make each adjustment (such as "Auto Setup") on the "Pos. /Size" menu as
necessary. (see page 22)
• Sync
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
• SDI Through
Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Off On
On: Enables active through.
Off: Disables active through.
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is selected.
• FRAME CREATION
Displays reducing screen À icker image for 50Hz/25Hz signal input.
Off On
Note:
This function activates only for 50Hz/25Hz signal input with 2D images.
36
access
2
select
1
1280×768 1366×768
Select the item and set.
For RGB
Signal
Sync
XGA Mode
H-Freq. 63.98
V-Freq. 60.02
Signal Format 1280×1024/60
For Digital
Signal
24p SMOOTH FILM
3D 24p Film Display
HDMI Range
H-Freq. 63.98
V-Freq. 60.02
Dot Clock Freq. 108.0
Signal Format 1280×1024/60
change
2
select
1
[ RGB ]
Auto
Auto
kHz
Hz
[ Digital ]
Off
60Hz
Auto
kHz
Hz
MHz