Power On / Off
Turn on the breaker dedicated to the Plasma
Display.
Press the Power switch on the Plasma Display to
turn the set on: Power-On.
Power Indicator: Green
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
unit, when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
button on the remote control to turn the Plasma Display off.
button on the remote control to turn the Plasma Display on.
Remote Control
Power Indicator
Sensor
switch on the
Right side surface
Main Power
On / Off Switch
13