Advanced Settings - Panasonic TH-152UX1 Operating Instructions Manual

Picture Adjustments
Item Effect
Contrast
Less
Brightness
Darker
Colour
Less
Hue
Reddish
Sharpness
Less

Advanced settings

Notes:
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Item Effect
Black
extension
Less
Input level
Less
Gamma
Down
"W/B"
Less
adjustment
Cinema
reality
Off
Studio
Off
Gain
26
Adjustments
Selects the proper brightness
and density for the room.
More
Adjusts for easier viewing of
dark pictures such as night
Brighter
scenes and black hair.
Adjusts colour saturation.
More
Adjusts for nice skin colour.
Greenish
Adjusts picture sharpness.
More
Adjusts the dark shades of the image in gradation.
More
Adjustment of parts which are extremely bright and hard to see.
More
S Curve
Up
W/B High R/G/B: Adjusts the white balance for light red, light green or light blue
areas.
W/B Low R/G/B: Adjusts the white balance for dark red, dark green or dark blue
areas.
Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B High R", "W/B
More
High G" and "W/B High B" settings.
2. Adjust the white balance of the dark sections using the "W/B Low R", "W/B
Low G" and "W/B Low B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to
make the adjustment.
When "on", the display attempts to reproduce a more natural interpretation of
sources such as movie pictures, which are recorded at 24 frames per second. If
the picture is not stable, turn the setting to "off".
Note:
On
When On, this setting only affects the following signal input:
525i (480i), 625i (575i), 1125 (1080) / 60i
Sharpens the contrast for a better view when a part of the image is too light to
see.
Off: Disables "Studio Gain".
On: Enables "Studio Gain".
Notes:
On
• "Studio Gain" can be modi¿ ed when "Studio mode" in the Options menu is
"On". When "Studio mode" is "Off", this setting is "Off" and cannot be changed.
(see page 43)
• This setting is valid only when the input signals are as follows:
RGB (analog), SDI, HDMI
Notes:
• You can change the level of each function
(Contrast, Brightness, Colour, Hue, Sharpness)
for each Picture Mode.
• The setting details for Normal, Dynamic,
Cinema and Monitor respectively are memorized
separately for each input terminal.
• In Contrast, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
Details
2.0 2.2 2.6