SATO /gt Series Programmer's Reference Manual page 151

Unit 5: Optional Command Codes
FORM OVERLAY, RECALL
FUNCTION
To recall the label image from stored in the Expanded Memory.
FORMAT <ESC>&R,aa
Place immediately following the <ESC>CC Memory Area Select command.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>&R,01
<ESC>Q1<ESC>Z
OUTPUT There is not a printer output as a result of this command.
NOTES The Expanded Memory option is required fro this command.
The <ESC>CC Memory Area Select command must be sent prior to this command.
Several images stored under different storage numbers can be printed with this
command. The storage number must be speciifed.
A read/write error will occur if an unused storage number is specified.
The label image can be moved by using the <ESC>V and <ESC>H commands when
it is stored along with a window size. If it exceeds the printable area by being moved,
the label image will be trancated.
Refer to Appendix, Table 36 for additional information.
SATO E+ Programming Reference
aa = Storage number (01 to 99)
PN 9001149A Page 5-13