SATO /gt Series Programmer's Reference Manual page 99

Unit 4: Standard Command Codes
OFFLINE/PAUSE
FUNCTION Specifies when, and under what circumstances, the printer goes into an off-line state.
When used within a print job, the printer goes off-line after finishing the print job.
FORMAT
<ESC>@,nn . . . n
Place anywhere between <ESC>A and <ESC>Z.
EXAMPLE <ESC>A
<ESC>@, LOAD BLUE LABELS AND PLACE PRINTER ON-LINE
...Job...
<ESC>Z
OUTPUT
This command does not result in printer output. The printer is placed in the Off-Line
mode as soon as the current print job is finished.
NOTES
When using this command and the print job specifies <ESC>Q10, all ten labels will
print before the printer goes off-line. Press the LINE key to return the printer to an on-
line status.
SATO E+ Programming Reference
nn...n = Optional display message on the LCD (32 characters max.)
PN 9001149A Page 4-57