Font, Raster - SATO /gt Series Programmer's Reference Manual

Unit 4: Standard Command Codes

FONT, RASTER

FUNCTION To print point size characters created using font definitions.
FORMAT
<ESC>A<ESC>RDabb,ccc,ddd,nn. . .n
Place within the normal command stream.
EXAMPLE <ESC>A
<ESC>V0100<ESC>H0100
<ESC>RDA00,P28,P28,CG Times
<ESC>V0200<ESC>H0100
<ESC>RDB00,075,075,CG Triumvirate
<ESC>Q1
<ESC>Z
OUTPUT
(4-20)
NOTES
The "cccc" Horizontal Size and "dddd" Horizontal Size parameters can be entered
either in dots or points, but both parameters must use the same value types. If point
size is used, the point size is preceded by a "P".
Refer to Appendix: Reference Tables 20 & 21 for additional information.
SATO E+ Programming Reference
a = F: Futura
P: CG Palcio
S: CG Century Schoolbook
G: CG Triumvirate Condenced
V: CG Univers
t: CG Times
bb = 0: No character set
1: ISO 8859/1 Latin1
2: ISO 8859/2 Latin2
3: ISO 8859/9 Latin5
4: CP-737 DOSGreek
5: CP-885 DOSCirillic
6: CP-864 DOSArabic
7: CP-874 Thai
8: PC850 Multilingal
ccc = Horizontal size (4 - 999 dots or P02 - P99)
ddd = Vertical size (4 - 999 dots or P02 - P99)
nn..n = Data to be printed.
PN 9001149A Page 4-26