Veri Code - SATO /gt Series Programmer's Reference Manual

Unit 4: Standard Command Codes

VERI CODE

FUNCTION Specifies VeriCode of 2D code.
FORMAT
<ESC>VC
Place anywhere after <ESC>V but before <ESC>Z.
EXAMPLE
<ESC>A
<ESC>H0100<ESC>V0100<ESC>VC1000505
<ESC>Q1
<ESC>Z
OUTPUT When setting ecc to "2d" and Digit Number of Data to 10 digits, the matrix size
becomes "14". In the same way, when setting ecc to "2" and Number of Data to 12
digits, the matrix size is should be "16".
(4-35)
NOTES If setting the value other than "0", "2", or "4" for the parameter of Error Correction
Level, "0" will be specified. If setting the value outside of the range of "01" to "10" for
the Cell Height and Cell Width parameter, "01" will be specified. ecc indicates error
correction.
SATO E+ Programming Reference
a = Error correction level (10 to 48)
b Error correction level (0, 2, 4)
c Cell height (01 to 10 dots/cell)
d Cell width (01 to 10 dots/cell)
PN 9001149A Page 4-46