Print Darkness - SATO /gt Series Programmer's Reference Manual

Unit 4: Standard Command Codes

PRINT DARKNESS

FUNCTION To specify a new print darkness setting through software control for unique media and
ribbon combinations.
FORMAT
<ESC>#Ea
Must be placed immediately after <ESC>A and immediately before <ESC>Z in its
own separate data stream.
Refer to the product manual for specific print speed increments.
EXAMPLE <ESC>A
<ESC>#E2
<ESC>Z
OUTPUT This command does not result in printer output.
NOTES This becomes the new setting in the printer configuration for all subsequent print jobs
unless changed. The setting is stored in non-volatile memory and is not affected by
cycling power. The lightest setting is the smallest value and the darkest setting is the
largest value.
SATO E+ Programming Reference
a = Print Darkness Value
PN 9001149A Page 4-48