SATO /gt Series Programmer's Reference Manual page 29

Unit 3: Command Quick Reference
COMMAND QUICK REFERENCE
INSTRUCTION
CI
CLa
CSa
Dabbcccn
dn...n
DCxx...x
SATO E+ Programming Reference
Transition to SBI Mode. Migrates the system to the SBL Mode of
operation.
a = Not specified - migrates to SBI only.
Specified - automatically executes relevant file along with
the migration to SBI mode.
CL/LF Deletion. Deletes the occurance of CR/LF characters in the data
stream.
a = 0: Do not delete CR/LF
1: Delete CR/LF
Print Speed Selection. Specifies a unique print speed in in./sec. through
software for a particular label.
a = Speed Range
Barcode, Human Readable Information (HRI). Specifies the character
type of human readable information of barcode.
a = 3: JAN/EAN13
4: JAN/EAN8
H: UPC-A
=
b Narrow bar width (01 to 12 dots)
c = Barcode height (001 to 999 dots)
n = Barcode print data
Barcode, Human Readable Information (HRI). Specifies the character
type of human readable information of barcode. May be used in
conjunction with the preceding <ESC>D.
d = Character type specification
XU
XS
XM
XB
XL
OA
OB
HRI data
n = HRI print data
Data Matrix. Print Data. Prints data using Data Matrix format specified in
BX Data Format command.
xx...x = Data to be printed. Cannot exceed 500 characters.
PN 9001149A
DESCRIPTION
Page 3-10