Installing And Adjusting The Anamorphic Lens; Fixed Anamorphic Lens - Runco LightStyle LS-HB Installation & Operation Manual

If you are installing an LS-HB with an anamorphic lens, proceed as follows to install and
adjust that lens.
It is extremely important that the primary lens is properly
Note
adjusted before you install the anamorphic lens. Ensure that
the image from the primary lens is perfectly centered on the
screen.
The fixed anamorphic lens mount kit consists of everything shown in Figure 3-16. Some
components shipped with your projector may differ slightly from what is shown in these
instructions.
6 Anamorphic Lens
Base Plate
4 Swell
Latch
Assembly
(2x)
1 Anamorphic Lens
2 Washer (4x)
Figure 3-16. Anamorphic Lens Mounting Assembly - Exploded View
Runco LS-HB/LS-HB Ultra Installation/Operation Manual
5 Anamorphic Lens
Mounting Bracket
3 Height/Pitch Adjustment
Screw, 4-40 x 1/4" (4x)
43
Installation
3.12
Installing and
Adjusting the
Anamorphic Lens

Fixed Anamorphic Lens