Specifications; Ls-Hb Specifications - Runco LightStyle LS-HB Installation & Operation Manual

Table 7-1 lists the LS-HB specifications.
Table 7-1. LS-HB Specifications
Video Support:
Computer Support:
Communication:
(2) HDMI with HDCP:
(1) Component (3 x RCA, gold):
(1) RGB (HD15):
(1) S-Video (4-pin mini-DIN):
(1) Composite (RCA, gold):
(1) 3.5mm mini jack:
(1) 9 pin D-sub:
(1) 3.5mm mini jack:
Runco LS-HB/LS-HB Ultra Installation/Operation Manual
Signal Compatibility
HDMI and DVI with HDCP for digital video, Component
and RGB HDTV (1080p, 1080i, 720p), Component and
RGB EDTV (576p, 480p), Component, Composite and
S-Video SDTV (576i, 480i), RGB SCART with adapter,
NTSC/NTSC 4.43, PAL (B,G)/(D,K)/I/M/N, SECAM
Digital and Analog up to 1920x1080 @ 60Hz,
Macintosh®
RS-232, IR remote, on-board keypad
Connectivity
HDTV RGB and Component, EDTV, SDTV, HDMI (High
Definition Multimedia Interface) with HDCP (High
Bandwidth Digital Content Protection), DVI via adapter
HDTV, EDTV, SDTV
SCART RGBS via component and composite inputs
(adapter not included)
HDTV, RGBHV, YUV, EDTV
SDTV
SDTV
12V (+/-1.5V) screen trigger (250mA)
RS-232 for discrete commands and software upgrades
Communication Parameters: 38400 bps, no parity, 8
data bits, 1 stop bit, no flow control
IR input for Niles/Xantech compatible IR repeater
systems
Communication Protocol: Conforms to NEC standard IR
protocol, 38-kHz carrier frequency, custom code =
0x06F9

7. Specifications

89
Specifications
7.1

LS-HB Specifications