Battery Installation - Icom IC-E7 Instruction Manual

2
BATTERY CHARGING

■ Battery installation

Before installing, or replacing the battery pack, be sure to turn
OFF the transceiver. If it's ON, push and hold [PWR] for 1
sec. to turn the power OFF.
qRemove the battery cover from the transceiver.
wInstall the BP-243 (Li-Ion battery pack).
• Be sure to observe the correct polarity.
Facing up this side
7
w
q
e
eReplace the battery cover to the transceiver.
Keep the battery contacts clean to avoid rust or poor con-
tact. It's a good idea to clean the battery terminals once a
week.
r
t