Dtcs Polarity Setting - Icom IC-E7 Instruction Manual

9
TONE SQUELCH AND POCKET BEEP

■ DTCS polarity setting

As well as a code setting, the polarity setting is also available
for the DTCS operation. When a different polarity is set, the
DTCS never releases audio mute even when a signal with a
matching code number is received.
qWhile pushing and holding [FUNC], push and hold
) for 1 sec. to enter set mode.
[SQL] ( •
ATT SET
w Rotate [DIAL] to select "EXPAND."
eWhile pushing and holding [FUNC], rotate [DIAL] to turn
the expanded set mode ON.
rRotate [DIAL] to select "DTCS P."
SCAN
S.MW
SET
SET
47
[DIAL]
WFMAM - DUP
T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 1 5 9
After 1 sec.
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW 9
1 5
tWhile pushing and holding [FUNC], rotate [DIAL] to select
the polarity from "BOTH N" (normal), "TN-RR" (TX: normal,
RX: reverse), "TR-RN" (TX: reverse, RX: normal) and
"BOTH R" (reverse).
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
TX/RX: Normal polarity
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
TX: Reverse, RX: Normal
y Push [SQL] (
) to exit set mode.
•
ATT SET
Push Push and hold
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
TX: Normal, RX: Reverse
WFMAM - DUP T SQL DTCS ATT
VOL PRIO P SKIP MR
LOW
1 5 9
TX/RX: Reverse polarity
Dual operation