Downfeed Controls; Identification; Using Coarse Downfeed; Using Fine Downfeed - Grizzly G0754 Owner's Manual

Downfeed controls

Identification

A
B
C
d
Figure 10. downfeed controls.
A. Fine downfeed handwheel
b. depth pointer and scale
c. Quill Lock Lever
D. depth pointer Adjustment Knob
E. downfeed selector Knob
F.
Coarse downfeed Lever

Using coarse Downfeed

1. Loosen the downfeed selector knob to engage
the coarse downfeed levers.
2. Adjust the depth pointer with the adjustment
knob as a visual downfeed guide.
3. use the coarse downfeed levers to raise and
lower the spindle.
Model G0754 (Mfg. Since 1/13)
F
e

Using Fine Downfeed

1.
Tighten the downfeed selector knob to
engage the fine downfeed handwheel.
2.
Adjust the depth pointer with the adjustment
knob as a visual downfeed guide.
3. rotate the fine downfeed handwheel to raise
and lower the spindle.

Depth Stop

the depth stop limits the downward movement of
the cutting tool. With the use of the depth pointer
adjustment knob (see D in Figure 10), it can be
adjusted anywhere within 0"–5". this is useful
when performing the same operation multiple
times.
-19-