Downfeed Controls - Grizzly G0667X Owner's Manual

Downfeed Controls

the quill downfeed movement is controlled by
three mechanisms: 1) the coarse downfeed
handle, 2) the fine downfeed handwheel, and 3)
the quill auto-downfeed system.
Coarse Downfeed Handle
1. turn the mill OFF and wait for the spindle to
stop.
2.
pull the knob of the quill auto-downfeed
selector out and rotate it clockwise to the
forward disEngAgE (manual) position (see
Figure 35).
Figure 35. Quill auto-downfeed selector.
NOTICE
To avoid damage to the quill auto-downfeed
gearing, always rotate the selector clock-
wise.
-30-
3.
Align the pin in the handle hub with one of the
holes in the handle base, then firmly seat the
handle onto the base (see Figure 36).
Quill lock
Figure 36. Coarse downfeed handle installed.
4. Make sure the quill lock is loose (see Figure
36), then rotate the coarse downfeed handle
around its hub to control the depth of the
spindle.
g0667X high precision Vs Vertical Mill
handle hub