Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the Figure below and the following
descriptions to become familiar with the basic
controls and components of this machine.
Understanding these items and how they work will
help you better understand the rest of the manual
and reduce your risk of injury when operating this
machine.
Downfeed Controls
A
D
Figure 1. G0822 control panel.
-2-
manual
BEFORE
B
C
F
E
A. Power Button (Green): Illuminates when
machine is connected to power. Starts spin-
dle rotation when pressed.
Note: Spindle switch must be engaged in
either the FORWARD/REVERSE position for
machine to begin spindle rotation.
B. Spindle Direction Switch: Toggles between
FORWARD (left), NEUTRAL (center), and
REVERSE (right).
C. Digital Readout: Displays spindle RPM.
D. OFF Button: Stops spindle rotation.
E. E-Stop Button: Cuts power to the spindle
motor and remains depressed until reset.
Twist clockwise to reset.
F.
Variable-Speed Dial: Controls spindle speed
from 100–600 RPM (low) to 425–2500 RPM
(high), depending on High/Low position of
V-belt.
Model G0822 (Mfd. Since 06/17)
Advertisement
Table of Contents
