Table of Contents
Advertisement
Unpacking
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
Needed for Setup
the following are needed to complete the setup
process, but are not included with your machine.
Description
•
Additional people ....................................... 1
•
safety glasses ........................ 1 per person
•
Cleaner/degreaser (Page 12) .... As needed
•
disposable shop rags ............... As needed
•
Forklift ......................................................... 1
•
Lifting strap (rated for at least 1000 lbs.) ... 1
Mounting hardware (Page 14) ... As needed
•
•
screwdriver Flat head #2 ........................... 1
•
Brass hammer ........................................... 1
If you cannot find an item on the inventory list, carefully check around/inside the machine and
packaging materials. Often, these items get lost in packaging materials while unpacking or they
are pre-installed at the factory.
Model G0754 (Mfg. Since 1/13)
SEcTION 3: SETUP
Qty
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Small Item Inventory: (Figure 2)
A. handwheel handles w/screws ................... 2
b. t-Bolts M12-1.75 x 55 w/Washers & nuts .. 2
c. Bottle for oil ............................................... 1
D. toolbox ....................................................... 1
E. open-end Wrenches 17/19, 22/24mm ..1 ea
F.
hex Wrench set 3, 4, 5, 10mm .............1 ea
G. drift Key ...................................................... 1
I.
drill Chuck B16, 1–13mm w/Chuck Key ..... 1
J.
spindle sleeve r-8–Mt#3 ......................... 1
K. drill Chuck Arbor r-8–B16 ......................... 1
L. spindle sleeve Mt#3–Mt#2 ...................... 1
A
C
B
K
J
i
h
Figure 2. small item inventory.
Qty
d
e
F
g
-11-
Advertisement
Table of Contents
