Network Page Definitions - Grandstream Networks GXP1160 User Manual

Date Display Format
Time Display Format
Settings -> Web Service
Enable Weather Update
City Code
Update Interval
Degree Unit
Settings -> XML Applications
Idle Screen XML Download
Download Screen XML At
Bootup
User Custom Filename
Idle Screen XML Server Path

NETWORK PAGE DEFINITIONS

Network -> Basic Settings
FIRMWARE VERSION 1.0.5.24
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.
Configures the date display format on the LCD. The following formats are
supported:

yyyy-mm-dd: 2012-07-02

mm-dd-yyyy: 07-02-2012

dd-mm-yyyy: 02-07-2012

dddd, MMMM dd: Friday, October 12

MMMM dd, dddd: October 12, Friday
Configures the time display in 12-hour or 24-hour format on the LCD. The
default setting is in 12-hour format.
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Specifies the degree unit for the weather information to display on the
phone.
Configures to enable idle screen XML download. Users could select
HTTP/HTTPS/TFTP to download the XML idle screen file. The default
setting is "No".
If set to "Yes", the idle screen XML file will be downloaded when the
phone boots up. The default setting is "No".
Specifies the custom file for the idle screen XML file to be downloaded.
Configures the server path to download the idle screen XML file. This
field could be IP address or URL, with up to 256 characters.
GXP1160/GXP1165 USER MANUAL Page 47 of 63