Voice Messages (Message Waiting Indicator); Call Features; Table 7: Call Features - Grandstream Networks GXP1160 User Manual

 This will end the second call and the screen will show the first call on hold.

End Conference.
 Press HOLD key
calls on hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:

The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on Conference Hangup" is turned on.

The option "Disable Conference" has to be set to "No" to establish conference.

When using Easy Conference Mode, use SEND key
using #, even when # could be used as SEND in normal phone calls.

VOICE MESSAGES (MESSAGE WAITING INDICATOR)

A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Dial into the voicemail box
to retrieve the message by entering the voice mail number of the server or pressing the MESSAGE key
(Voice Mail User ID has to be properly configured as the voice mail number under Web
GUI->Account x->General Settings). An IVR will prompt the user through the process of message retrieval.

CALL FEATURES

The GXP1160/GXP1165 supports traditional and advanced telephony features including caller ID, caller ID
with caller Name, call forward and etc.
Block Caller ID (for all subsequent calls)
*30
FIRMWARE VERSION 1.0.5.24
to split the conference call. The conference call will be ended with both

Table 7: CALL FEATURES


Off hook the phone;

Dial *30.
GXP1160/GXP1165 USER MANUAL
to dial out the second call instead of
Page 25 of 63