automatically placed on hold;
Dial the number and press SEND key
entered, a "Transfer" softkey will show. If "Transfer" softkey is pressed instead of SEND or #, a
blind transfer will be performed);
Press TRAN key
For Auto-Attended Transfer, after dialing out the number for the second call, a "Split" softkey will
show. If the second call is not established yet (ringing), pressing "Split" will hang up the second call.
If the second call is established (answered), pressing "Split" will resume the second call and keep
the first call on hold.
Note:
To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains.
3-WAY CONFERENCING
GXP1160/GXP1165 can host 3-way conference call with another 2 parties (PCMU/PCMA).
Initiate a conference call.
Establish calls with 2 parties respectively;
Press CONF key
Press FLASH key
Cancel Conference.
The user can press the "Cancel" softkey to cancel a conference after pressed CONF key
This will resume the 2-way conversation with the current line.
Split and Re-conference.
During the conference, press HOLD key. The conference call will be split and the calls will be put
FIRMWARE VERSION 1.0.5.24
or # to make a second call. (Once the number is
again. The call will be transferred.
;
. The 3-way conference will be established.
GXP1160/GXP1165 USER MANUAL
.
Page 23 of 63