Grandstream Networks GXP1160 User Manual page 38

Use P-Preferred-Identity
Header
Account x -> SIP Settings -> Advanced Features
Broadsoft Call Center
Hoteling Event
Call Center Status
Publish to Call Center
Feature Key
Synchronization
Line Seize Timeout
Conference URI
Music On Hold URI
PUBLISH for Presence
Special Feature
Account x -> SIP Settings -> Session Timer
Session Expiration
Min-SE
Caller Request Timer
FIRMWARE VERSION 1.0.5.24
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which is when
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will not
show in INVITE. If set to "Yes", the P-Preferred-Identity Header will always
show in INVITE. If set to "No", the P-Preferred-Identity Header will not show in
INVITE.
When set to "Yes", Feature Key Synchronization will be enabled regardless of
web settings. The default setting is "No".
Enables Broadsoft Hoteling event feature. The default setting is "No".
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND and Call Forward features can be synchronized with Broadsoft
server. The default setting is "Disabled".
Defines the interval (in seconds) before the line can be seized when Shared
Line is used. The default value is 15 seconds.
Configures the conference URI when using Broadsoft N-way calling feature.
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
Enables presence feature on the phone. The default setting is "No".
Different soft switch vendors have special requirements. Therefore users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro or Huawei IMS
depending on the server type. The default setting is "Standard".
The SIP Session Timer extension that enables SIP sessions to be periodically
"refreshed" via a SIP request (UPDATE, or re-INVITE). If there is no refresh
via an UPDATE or re-INVITE message, the session will be terminated once
the session interval expires. Session Expiration is the time (in seconds) where
the session is considered timed out, provided no successful session refresh
transaction occurs beforehand. The default value is 180 seconds.
The minimum session expiration (in seconds). The default value is 90
seconds.
If set to "Yes" and the remote party supports session timers, the phone will use
GXP1160/GXP1165 USER MANUAL Page 38 of 63