Grandstream Networks GXP1160 User Manual page 46

Headset Type
Always Ring Speaker
Headset TX gain
Headset RX gain
Handset TX gain
Settings -> LCD Display
LCD Contrast
Settings -> Date and Time
NTP Server
Allow DHCP Option 42
Override NTP Server
Time Zone
Self-Defined Time Zone
FIRMWARE VERSION 1.0.5.24
between Headset and Speaker.
Selects headset type from Normal RJ9 headset or Plantronics EHS
headset. The default setting is "Normal".
Configures to enable or disable the speaker to ring when headset is used
on "Toggle Headset/Speaker" mode. If set to "Yes", when the phone is in
Headset "Toggle Headset/Speaker" mode, both headset and speaker will
ring on incoming call. The default setting is "No".
Configures the transmission gain of the headset. The default value is
0dB.
Configures the receiving gain of the headset. The default value is 0dB.
Configures the transmission gain of the handset. The default value is 0
dB.
Configures the LCD contrast level (from 0 to 20). The default value is 10.
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server.
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set up
on the LAN. The default setting is "Yes".
Configures the date/time used on the phone according to the specified
time zone.
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead which is
U.S central time. If it is positive (+) if the local time zone is west of the
Prime Meridian (A.K.A: International or Greenwich Meridian) and
negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
rd
Tuesday...)
3
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon,
Tues, ... ,Sat)
GXP1160/GXP1165 USER MANUAL Page 46 of 63