Recording; Recording Setup - Q-See QSD2316L User Manual

Click OK button to delete the user
STEP6
Note: Defining users' rights
Administrator: has rights to do every thing.
Advance: all functions except entering USER to manage users
Normal: all functions except entering SYSTEM to change the settings.
The user name and password is a combination of numbers, letters or symbols. The number of characters must be 1 or more.

3.3 Recording

3.3.1 Record Setup
Users need to install and format a HDD, and set all the recording parameters before recording.
Note: Some vendors sell the DVR with a hard drive already installed, if this is the case you just need to set the recording parameters.
There are four recording modes. Users can enable them simultaneously, but only one recording mode works at a
time. They have different priorities, the priority order is below:
Motion detection recording > Sensor recording > Manual recording > Timer recording
Press right mouse button to show the control bar, refer to Fig 4.1 Control Bar. Enter Menu---->System.
Enter RECORD configuration, refer to Fig 3.7 Record Setup, Select cameras.
STEP1
QSD2316L DVR User's Manual
21