Chapter 6 Remote Surveillance; Accessing Dvr; On Lan - Q-See QSD2316L User Manual

CHAPTER

6.1 Accessing DVR

If want to view the DVR remotely it must be connect to LAN or internet, and network server must be enabled in the unit.
Please refer to 4.2.7 Network Configuration.
This unit supports Internet Explorer browser without any client software installed, it also supports XP and Vista.
6.1.1

On LAN

Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router.
STEP1
Enter Video to set network video parameters like resolution, frame rate etc.
STEP2
Open IE browser on a computer on the same LAN. Input the IP address of the DVR in IE address blank and
STEP3
enter.
IE will download ActiveX automatically. Then a window pops up and asks for user name and password.
STEP4
Input name and password correctly, and enter. It will show the picture below:
STEP5
QSD2316L DVR User's Manual
6 Remote Surveillance
73