Using Mouse - Q-See QSD2316L User Manual

2.5.2 Using Mouse

In live view:
Click left mouse button on one camera to display full screen. Click again to return to the previous screen display.
Click right button to show the control bar at the bottom of the screen as in Fig 2.10 Remote Control. Here are all the
controls and setup. Click right mouse button again to hide the control bar.
In setup:
Click left button to enter. Click right button to cancel setup, or return to the previous screen.
If want to input the value, move cursor to the button and click. An input window will appear as in Fig 2.10 Remote
Control. It supports numbers, letters and symbols.
Users can change some values by using the mouse wheel, such as time. Move cursor onto the value, and roll the
wheel when the value blinks click it.
It supports mouse dragging, i.e. set motion detection area: click customized, hold left button and drag to set motion
detection area. Set schedule: hold left button and drag to set schedule time
In playback: Click left button to choose the options. Click right button to return to search mode.
In backup: Click left button to choose the options. Click right button to return to live view.
In PTZ control: Click left button to choose the buttons to control the PTZ. Click right button to return to searching
mode.
Note: Mouse is the default tool in all the operations below unless stated otherwise.
14
Digital Video Recorder User Manual
Fig 2.11 Input Window