Q-See QSD2316L User Manual page 63

Hide thumbs Also See for QSD2316L:

Table of Contents

This unit supports DHCP, PPPoE, DDNS. Users enable network function, and configure IP address, DDNS,

transmission video parameters here. The following are the definitions of each option:

HTTP port: The default is 80. If users change the value, they need add the port number when typing the IP address

in IE address blank, i.e. set HTTP port to 82, IP address to 192.168.0.25. Users need input http://192.168.0.25:82 in IE

browser.

Server port: Communication port.

DHCP: Enable DHCP. For this feature to work you need to enable DHCP in the router or virtual server. When

enabled the unit will get IP address information automatically from the router instead of inputting IP, Subnet, and

Gateway manually.

IP, Subnet, Gateway, DNS1 and 2: IP address information. If users don't enable DHCP it is necessary to input the

IPs manually here.

QSD2316L DVR User's Manual

Fig 4.13 Network Configuration

Table of Contents

Show Quick Links

Table of Contents