Check System Information - Q-See QSD2316L User Manual

Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.
STEP1
Click Load default. Select setup blocks; please refer to Fig 5.2 Reset Blocks.
STEP2
Press OK to do default. It will return to TOOLS interface after finished.
STEP3

5.4 Check System Information

Users can check system information like firmware version, IP address and etc.
Press right mouse button to show the control bar. Click Menu, refer to Fig 4.2 Pop up Menu.
STEP1
Click Info, the window below will appear.
STEP2
66
Digital Video Recorder User Manual
Fig 5.2 Reset Blocks