Mouse; Remote Control - Q-See QT SERIES User Manual

In addition to the buttons on the front of the DVR, your system can be controlled through the USB
mouse and the remote control. We have found that the majority of our customers prefer to operate their
DVRs using the USB mouse because of its ease of use and flexibility and our manual is set up with this in
mind.

2.2 MOUSE

The mouse is the default tool for navigating through the menus. Specific instructions for its use within a
function appear in the appropriate sections of the manual, but a basic overview is below:
In Live View:
Double-click the left button on any camera view in
split-screen mode to bring it to full-screen display.
Double-click again to return to split-screen mode.
Right-click to show the control bar at the bottom of
the screen.
Right-clicking again will hide the control bar.
In Setup:
Left-click to make a selection. Right-click to
cancel setup or return to previous screen.
To Input Values:
Move the cursor to a blank field and click. A virtual keyboard will appear which supports numbers, letters
and symbols. The Shift function will access symbols in addition to upper case letters.
Certain values, such as time settings, can be changed using the mouse wheel.
14
PICTURE 2-1
PICTURE 2-2

2.3 REMOTE CONTROL

The remote control allows you to perform most of the day-to-day functions from a convenient distance.
It functions as a typical remote control with additional buttons allowing you to navigate through menus
and control functions. We recommend that you configure your DVR using the mouse controls, reserving
the remote control for operations such as live viewing, file search and playback.
The remote uses two AAA-sized batteries. If the remote's performance degrades, check the batteries as
well as making sure that the IR receiver window on the DVR is unobstructed.
1 2 3 4
REC
Search
MENU Exit
ENTER
ZOOM PIP
Multi Next SEQ
INFO
10 11 12 13
PICTURE 2-3
NOTE! The remote that shipped with your DVR will be compatible with that
model. It may not be compatible with other models of DVRs, even those from the
same series. Your remote may contain buttons for features not available on your
DVR.
# Button Function
1 Menu Open Main menu
2 REC Begin recording
Opens up video search
3 Search
window
4 Exit Exits menu or interface
Direc- Move cursor
5
5 tional Control PTZ direction in
Controls PTZ mode
6
6 Enter Confirms choice
7 PiP Picture-in-Picture mode
8 Zoom Activates digital zoom
7
Play/Pause, Stop,
Play-
8 Fast Forward, Rewind,
9 back
Single Frame Forward/
Controls
Backward
9
Multi- Choose multi-screen
10
Screen display mode
Switch to next live view
11 Next
group
12 Info Opens DVR Info menu
Switch to sequential
13 SEQ
channel display
15