Mouse Control; Virtual Keyboard; Remote Control - Q-See QC SERIES User Manual

2.2 MOUSE CONTROL

Your NVR is controlled through the USB mouse. Some models also include an infrared remote control
and buttons on the front panel that serve as shortcuts.
The mouse works the same as on a computer with different functions possible:
LEFT CLICK: Selecting an item
Opening a menu
Checking a box or motion detection status
Selecting letters, numbers or symbols on the virtual keyboard.
DOUBLE CLICK: Selecting an event for playback
Selecting a screen to zoom into from multi-screen mode
RIGHT CLICK Exits any window. Exits any menu or reopens previous menu.
Opens Pop-Up Shortcut Menu (right).
The options shown - especially multi-
channel viewing options - will vary by
model
MOUSE WHEEL Page up or page down
Switch items in check box
Increase or decrease numerical value in
numerical input box
CLICK-AND-DRAG Select motion detection zone
Select privacy mask zone

VIRTUAL KEYBOARD

Whenever a menu field requires text - such as a password, new user name, or other setting - clicking
on that field will bring up the virtual keyboard. It operates as regular keyboard using the point and click
function of the mouse to select individual characters. Clicking the shift key allows access to the upper-
case characters.
Spaces are entered using the symbol and characters are deleted with the
or clicking outside of the keyboard will close it.
12
PICTURE 2-1
PICTURE 2-2
key. Clicking Enter

2.3 REMOTE CONTROL

The buttons on the Remote Control operate in the same manner as on a conventional video player remote.
Some buttons have multiple functions depending on which menu is being accessed.
# Name Function
1 Power Turn on or shut down the NVR before turning it
Button off with the power switch.
2 Address An additional security feature. You can require
the NVR to ask you to enter the Device
Number (found in the General Settings menu)
before being able to access the log-in screen.
3 Fast Multiple fast forward speeds in Playback mode.
Forward
Zoom in when in PTZ mode.
4 Next Goes to next video in Playback mode.
Record
Adjust focus when in PTZ mode.
5 Slow Play Multiple slow playback speeds and resumes
normal playback.
Zoom out when in PTZ mode.
6 Play/Pause Will open Playback/Search mode.
Begins playback of selected video or pauses
current video.
Adjust Iris (light level) in PTZ mode.
7 Previous Goes to previous video in Playback mode.
Record
Adjust focus when in PTZ mode.
8 Reverse/ "Rewind" current video or resume normal
Pause playback.
Adjust Iris (light level) in PTZ mode.
9 Escape Cancel current function or exit current menu.
10 Enter Select default button. Go to main menu.
11 Multi-view Cycle through available multi-screen display
mode modes.
12 Record Opens recording interface. Use directional keys
to select recording mode and channel.
13 Directional Navigate through menus.
Keys
Cycle through channels in single- or 8-screen
viewing mode.
Control Playback progress bar in Playback
mode
Control PTZ camera and switch menus in PTZ
mode.
14 Function Opens volume control.
Switches PTZ control menu
Use with Directional keys to set up Motion
Detection
15 0-9 Keys Use in similar manner to phone keypad to enter
password, etc.
Push number to select desired channel for
viewing.
NOTE! Some NVRs are not
designed to be used with a
remote control and one will
not be included with those
models.
1 2
3 6
4 7
5 8
9 12
10
13
11 14
15
PICTURE 2-3
13