Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual page 232

HP O V I
PEN IEW NTEGRATION
Please enter the location of your OpenView installation.
Install Directory [/opt/OV]:
Press [Enter] to accept the default, or enter the path and directory where the HP
OpenView software is located.
The integration process verifies that you have the required version of the HP
OpenView software installed in that location.
8 Enter the appropriate answers to the following questions:
Would you like to integrate ExtremeWare Vista?: (Y/N) [Y]:
Would you like to integrate ExtremeWare Enterprise Manager (EEM)?: (Y/N)
[Y]:
Please enter the EEM Server [ <eem-server-host> ]
The default is the host upon which you are running the installation script.
Please enter the http port used by EEM: [80]
Would you like to update the installed MIBs?: (Y/N) [Y]:
Installation of Extreme Network's Management Information Base (MIB) definitions is
necessary for HP OpenView to recognize and manage Extreme Networks devices.
9 The script then asks you to confirm the installation/integration instructions:
*** Configuration
Please review the following items:
Vista Integration
EEM Integration
EEM Port
EEM Server
Update MIBS
Are these correct? (Y to accept / N to re-enter) [N]:y
10 If you answer N, the script asks for these choices again.
Upon a Y or [Enter], the integration software then updates the appropriate HP
OpenView files.
Updating OV files...
A-6
= YES
= YES
= 80
= <eem-server-host>
= YES
E W E M
XTREME ARE NTERPRISE ANAGER
I U G
NSTALLATION AND SER UIDE