Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual page 90

U I M
SING THE NVENTORY ANAGER
2 Type a name for the port group into the Port Group Name field, and a description
(optional) into the Description field.
3 Select a device from the Devices list. This displays a list of ports on the switch that
are available to be included in the port group.
4 Select one or more ports from the Available Ports list. Click the Add -> button in the
middle of the screen to add these ports to the Selected Ports list. Click the
Add All -> button to add all ports from the device to the Selected Ports list.
5 To remove a set of ports from the Selected Ports list, select the ports and use the
<- Remove button. Use <- Remove All to clear the Selected Ports list.
6 Repeat steps 3 through 5 until you have included all the ports that should be
members of this port group.
7 To add the new port group to the database, click the Add button at the bottom of the
window.
M D
ODIFYING EVICES
G
ROUPS
You can use the Modify function to modify the access parameters for an individual
device, or to add and delete members of a device group or port group. Users with
Administrator or Manager access can modify device contact information, device groups
and port groups.
If you have Monitor access only, you can not use this function.
M D
ODIFYING A EVICE
To modify the contact information for a managed device in the database, do the
following:
1 Click the Modify button at the top of the Inventory Manager main page.
Select the appropriate tab to display the Modify Device window, as shown in
Figure 5-12.
5-18
, D G
EVICE ROUPS AND
P
ORT
E W E M
XTREME ARE NTERPRISE ANAGER
I U G
NSTALLATION AND SER UIDE