Adding Or Modifying User Groups - Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual

A
DDING OR
1 To create a new User Group, click New at the top of the Policy System page, then
select User Group from the pull-down list.
To modify an existing User Group, select User Groups under the Users entry in the
Component Tree.
Either method will display the Local Group – Users page as shown in Figure 8-24.
Figure 8-24: The Local Group – Users view
2 To add a new User Group, type the group name in the Name field, and an optional
description in the Description field.
3 Click the selector box to the right of the Members field to display a list of the users
known to the Enterprise Manager. Select user names from this list and use the
Add -> button to add them to the Selected items list. Use Remove -> to remove
names from this list. When you are finished, click OK.
E W E M
XTREME ARE NTERPRISE ANAGER
M
ODIFYING
I U G
NSTALLATION AND SER UIDE
U G
SER ROUPS
A M U G
DDING OR ODIFYING SER ROUPS
Member
selector
Remove
member
8-47