Modifying Devices And Device Groups; Modifying A Device - Extreme Networks EPICenter Reference Manual

5 To add the newly created device group to the database, click the Add button at the bottom of the
window.
If you have added a device to more than one device group, the Available Devices list displays a
separate entry for each device group to which the device belongs, as shown in
Figure 28: Device belonging to multiple device groups in Add Device Groups window

Modifying Devices and Device Groups

You can use the Modify function to modify the access parameters for an individual device, or to add
and delete members of a device group. You must have Administrator or Manager access to modify
device contact information and device groups. If you have Monitor access only, you cannot use this
function.

Modifying a Device

You can display the Modify Devices and Device Groups window in three ways:
Select Modify from the Inventory menu
●
Click the Modify button on the Toolbar
●
Select a device in the Component Tree, right-click to display the pop-up menu, and select Modify.
●
The Modify Devices and Device Groups window appears, as shown in
displayed. If you have a device selected in the Component Tree, it is preselected in the Modify Devices
tab, with its settings displayed.
To modify the contact information for one or more managed devices in the database, do the following:
EPICenter Reference Guide
Modifying Devices and Device Groups
Figure 28.
Figure 29, with the Devices tab
73