U
VLAN M
SING THE
ANAGER
Figure 7-9: The Modify VLAN dialog, IP Forwarding page
11 Select a switch from the table of switches.
12 Change the IP address and IP mask as appropriate. Click the Enable IP forwarding
check box to enable or disable IP forwarding for this VLAN on the switch.
13 Click Apply to have the changes take effect.
A
D
DDING AND
Users with Administrator or Manager access can view, add, and delete protocol filter
definitions. If you have Monitor access, you can view filter definitions, but not add or
delete them.
To view, delete or add protocol filter definitions, do the following:
1 Click Protocol Filters in the VLAN Manager.
The View/Delete page of the Protocol Panel dialog box is displayed, as shown in
Figure 7-10.
7-12
P
ELETING
ROTOCOL
F
ILTERS
E
W
E
M
XTREME
ARE
NTERPRISE
ANAGER
I
U
G
NSTALLATION AND
SER
UIDE