Event: Hdd Full - EverFocus ERS-4 Instruction Manual

3 . 8 . 2 . 4 E v e n t : H D D F u l l
This menu defines reactions, if full HDD capacity is reached.
Note: Settings in this menu are only active, if the ERS-4 works not in "OverWrite" mode (check box in
RECORD menu)
Event
Log
Buzzer
Email Notify
Network Alarm
Alarm Output
Output Type
Timeout Duration
Apply
Select HD Full.
Check box to record HDD full events in the log.
Check box to enable buzzer in case of HDD full events.
Check box to send email notification case of HDD full events.
Check box to send out a network alarm to client PC case of HDD full events.
(requires PowerCon software and setting up Alarm Server in Network Setup menu)
In case of event the output relay will switch. It can be set to either "NONE" (not
active) or "1" (relay activated).
Output action when HDD full event is triggered.
Transparent:
Timeout:
Transparent+Timeout: Alarm will reset after event ended + Timeout Duration.
Duration of event for the Output types "TIMEOUT" and
"TRANSPARENT+TIMEOUT".
Enter the event duration in the range 1 ~ 150 seconds.
Save the settings for this event type.
Alarm is active as long the event is active.
Automatic alarm reset after a defined time (Timeout
Duration)
38
ERS-4 Instruction Manual