EverFocus ERS-4 Instruction Manual page 110

Virtual Servers allows users who are connecting remotely to access services on the router's Local Network.
The functions of each field are described below.
Virtual Server - Select Enabled or Disabled
Name - Enter the name referencing the virtual service
Private IP - The IP address of the device running the local services.
Protocol Type - The protocol used for the virtual service.
Private Port – The port number that the service uses on the LAN (Local Area Network).
Public Port - The port number that the services uses on the WAN (Wide Area Network).
Schedule – The time period the virtual server will be active.
When you have input all the information for a virtual server, click on Apply to add it to the list at the
bottom or Cancel to clear all fields.
Here is an example of the information for each service:
Name Private IP
HTTP 192.168.1.50
CTRL 192.168.1.50
Note: If you changed port 80 in the DVR's Network Menu, open that port instead of 80.
Protocol Private Port
Both 80
Both 1600
103
ERS-4 Instruction Manual
Public Port Schedule
80 Enable
1600 Enable