EverFocus ERS-4 Instruction Manual page 118

Subnet Mask: This field shows the subnet mask for your network so the ERS-4 will be recognized within
the network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the ERS-4 will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS server 1: This field shows the primary DNS server for your network. When DHCP is selected and an
internet connection is available, this value will be assigned automatically. This field must be assigned
correctly if you plan to use the DDNS feature (see DDNS for more detail).
DNS server 2: This field shows the secondary DNS server for your network.
Note: The default addresses in the machine are for internal testing only. You must apply
your own addresses to comply with your network. Refer to Chapter 8 for more details.
Apply: Press "Apply" button to save and apply Express settings to ERS-4. The system will automatically
adjust recording frame rate according to settings. The following message will pop up, press "Yes" to change
Resolution, Recording frame rate and Quality depending on your express setting.
111
ERS-4 Instruction Manual