3.11.4 HDD FULL
WARNING SETUP MENU
FAN FAULT
BUZZER
HDD TEMP.
ALARM OUTPUT
NO HDD
ALARM DURATION PERMANENT
HDD FULL
NETWORK ALARM NO
EMAIL
In operation mode HDD FULL: STOP (setting in RECORDING menu), the recording
process is stopped if the harddisk is full. Define the alarm reactions in this menu item:
(1)BUZZER:
(2)ALARM OUTPUT: Output relay activation.
(3) ALARM DURATION: Alarm duration adjustment from 1~99 seconds or permanent
(4) NETWORK ALARM:
menu)
(5)
menu).
ENABLE
1
NO
By selecting "ENABLE", the buzzer is activated.
1 – Output relay 1 ~ 4 (selection) switches upon alarm.
NONE – no output relay reaction upon alarm.
YES: Network alarm activated (for settings refer to NETWORK
Network alarm reception requires optional PowerCon software.
NO: No network alarm transmission
EMAIL:
YES: Alarm email transmission (for settings refer to NETWORK
NO: No email alarm transmission.
52