Table of Contents
Advertisement
3.6.3 Camera: Motion
Camera
Enable
Log
Main Monitor
Pre-alarm Record
Buzzer
Email Notify
Network Alarm
Select camera 1~4 for adjustment.
Check box to enable motion detection. Other motion options will not be available
unless this feature is selected.
Check box to record motion events in the log.
Reaction of (locally at ERS-4 installed) monitor:
No change:
No change on the main monitor display.
Full screen:
A full screen of the active camera will display on the main monitor.
Check box to record several seconds before the motion event.
(Pre-alarm recording rate will follow "Normal" frame rate setting)
Check box to enable buzzer when a motion event is triggered.
Check box to send email notification when a motion event is detected.
Check box to send out a network alarm to client PC when motion occurs. (requires
PowerCon software and setting up Alarm Server in Network Setup menu)
28
ERS-4 Instruction Manual
Advertisement
Table of Contents
